SCM Unit - 2 containments. The Secondary containment monitoring (SCM) system is designed to detect leaks in double-wall piping, tanks, and sumps. The system utilizes the siphon/vacuum port of a submersible turbine pump to draw a vacuum on these interstitial spaces. The vacuum levels are then continuously monitored to detect any potential leaks in these double-wall containments. Requires FE Petro Submersible Pumps, an EVO550 or EVO5000 console with SCM Software + TS-420IB + TS-ACI + TS-RLY Boards installed
Up to four different containments can be connected to each submersible turbine pump using a combination of single and dual channel TS-SCCM secondary containment control modules and secondary syphon ports.
The secondary containment control module collects information on all interstitial spaces.
Gathers system status, replenish rate, alarm, and diagnostic information.
Utilizes AUTO-LEARN® technology to learn the actual interstitial space being monitored based on the vacuum flow rate through a calibrated orifice for precise leak detection.
Alarms when vacuum cannot be maintained or when liquid is detected in secondary space.
Optional positive submersible turbine pump shut-down upon alarm.
Compatible with FE PETRO® brand submersible turbine pumps as well as Red Jacket® STPs.
All components necessary for installation including syphon check valve,vacuum hose, fittings and other installation accessories are available from Franklin Fueling systems.
Components
1. Secondary containment control module
2. Vacuum line to secondary contained pipe
3. Pipe fitting with integrated test port
4. Secondary contained pipe
5. Vacuum line to secondary contained tank
6. Tank installation kit
7. Line weight (included with tank install kit)
8. Syphon check valve
9. TS-550 evo™ with SCM software