Close
Your one stop-shop for fuel & tanker equipment
Free next day delivery on stock items for orders over £250.00 (excludes heavy/bulky/long items)

Risbridger Dead-Stop Overfill valve - adjustable float + weld socket and 2" lock nut

Valves & Hardware

Stock Code: 100100-1-AF

£580.75
Buy Now

The DEAD STOP is a 2" overfill prevention valve with a ZERO leak rate, suitable for commercial above ground diesel storage installations, generator belly tanks and pressure deliveries

With a flow rate of 10 500 l/min and a maximum operating pressure of 10 bar 145 psi) the DEAD STOP 2 is suitable for a range of applications, protecting against the risk of an overfill should other methods fail

Includes both 2" and 1" Female BSPP Threaded flanged adaptors allowing easy pipework connection and alignment.

  • Cartridge construction for easy installation and in situ examination via a single 2” aperture.
  • High flow capacity
  • Effective at low flow rates (10 500 l/m pressure delivery up to 10 bar maximum.
  • Suitable for fuels of SAE10 or lower
  • Compatible with all pipework brands
  • Flexible connectors are available, to make installation easy and remove stress from pipework
  • The valve shuts in the direction of the flow, ensuring a positive seal maintained by the fill pressure
  • 100% tested in factory

Materials:

  • Anodised Aluminium
  • Viton A (FKM)
  • Stainless Steel
  • HDPE closed cell foam

Suitable for:

  • Diesel
  • HVO
  • Bio Diesel
  • FAME Blends

Flow-rates / Pressure limitations

  • 10-500 litres per minute
  • Max 10 bar pressure

Activation Height

  • Standard float unit closes the valve when fuel reaches around 145mm below the tanks brimfull level
  • Adjustable float unit has a 1m long float droptube which can be cut to length to allow the valve to activate when fuel level reaches up to 1m below the tanks brimfull level
Close

Your order contains no items

We have placed cookies on your device to help make this website better.