Class III leakage detection system / leak detection system for detecting occurring liquids.
The leak indicating unit has 8 probe connections. By installing an expansion board, the number can be increased to 16.
Depending on the design of the probe suitable for monitoring shafts or double-walled pipes.
TYPE:
LS 816
MONITORING OF:
Collecting chambers, monitoring chambers and shafts
PRODUCTS:
Liquids with a density higher than 0,7 g/cm3 that do not affect stainless steel.
The (possible) explosive vapor-air mixtures must be classifiable into gas group II A to IIC as well as in the temperature code T1 to T4.
INSTALLATION:
Leak indicating unit: outside of Ex areas
Sensor (stainless steel float switch): zone 1
HOUSING / IP RATE:
Leak indicating unit: plastic box (pl-box) / IP 30
TEMPERATURE RANGE:
Leak indicating unit: -0 °C .. +40 °C
Sensor: -25 °C .. +60 °C