EVO550 ATG with Display. EVO™ 550 & EVO™ 5000 Automatic Tank Gauges (ATGs) provide highly accurate inventory management and full-featured compliance monitoring for any size fuel system. These module-based ATGs are highly configurable for site-specific probe and sensor requirements. Their simple setup and operation, remote connectivity, and advanced security features protect your fuel system while keeping you directly connected to vital site data whenever, and wherever. The highly-intuitive, full-color, icon-based touch screen provides user-friendly on-site access to inventory, alarm, and compliance data. Allows you to make informed, data-driven inventory management decisions while keeping your site in compliance and protected from security threats.
Provides inventory monitoring, static and continuous tank testing, tank autocalibration, inventory reconciliation, and containment compliance monitoring.
With the EVO™ 550, six total modules can be installed with a maximum of four intrinsically safe modules and a maximum of three of any one kind of module. With the EVO™ 5000, eleven total modules can be installed with a maximum of nine intrinsically safe modules and a maximum of three of any one kind of module.
The TS-550/5000evo is a modular, automatic, continuous monitoring system that uses plug-in modules to perform a wide
variety of functions. From fuel management, monitoring, and/or control functions. The TS-550/5000evo with its plug-in
modules allows you to customize the system to meet your needs. Purchase only those functions that you require, and
expand your system later for greater capabilities.
The TS-550/5000evo’s enhanced processor and additional memory on the CM (Controller Module) along with the
flexibility of the modular design allows for peak performance while monitoring multiple systems. The TS-550/5000evo
can easily monitor all of your tanks, lines, sumps, and secondary containments.
The TS-550/5000evo console comes standard with a Controller Module (CM), Power Supply Module (PS), and a color
LCD display and these features:
6
• Generates reports automatically in response to preset/programmed conditions and alarms
• Provides audio-visual annunciation when an alarm or warning condition exists
• Performs inventory monitoring
• Is able to print reports on a compatible external Hewlett-Packard Printer
• Can communicate via Ethernet, RS-232, RS-485, or an optional internal fax/modem.
Specifications
Maximum tanks monitored: 36 (EVO™ 550) / 36 (EVO™ 5000)
Maximum sensor input capacity: 48 (EVO™ 550) / 96 (EVO™ 5000)
Lines capacity: 24 (EVO™ 550) / 24 (EVO™ 5000)
Dry contact input channels: 2
AC input channels: 36 (EVO™ 550) / 36 (EVO™ 5000)
Relay output channels: 26 (EVO™ 550) / 50 (EVO™ 5000)
Connectivity: Ethernet, RS-485, standard USB (qty 2)
Display type: 7” (17.78 cm) color LCD touch screen
Printer type: Thermal (also network or USB)
Alarm: Internal audible alarm
LEDs: Alarm, warning, and power
Applicable liquids: Petroleum, chemicals, and waste
Level units: Inches, centimeters, and millimeters
Volume units: gallons or liters (mass with density option)
Power requirements: 110 to 240 VAC, 50/60 hz, 2.6 Amps
Operating temperature: 32° to 104 °F (0° to 40 °C)
Humidity: 0-90% non-condensing
EVO™ 550: H: 11.75”(300mm), W: 10¼”(260mm), D: 9”(229mm)
EVO™ 5000: H: 11.75”(300mm), W: 16½”(419mm), D: 9”(229mm)
Capabilities
High/low product, water, and temperature alarm set points
Inventory reconciliation / tank autocalibration
Density, mass, and phase separation measurement
Email and SMS notifications
Back-up generator monitoring / fuel flow control
Advanced logic control for DEF/AdBlue® recirculation system
MODBUS™ support
Approvals
UL, cUL, ATEX, IECEx
Third party certification of leak detection capabilities.