Inventory Probe for tanks up to 195cm. Digital inventory and leak detection probes provide accurate tank level monitoring and reporting with optional leak detection capabilities. These probes employ digital magnetostrictive position measurement technology for highly accurate tank readings.
Bottom Mount Installation
With no hanging installation kit needed, the probe can simply be placed in the tank riser and rested on the tank bottom.
Faster Setup
The probe automatically sends important setup data to the tank gauge eliminating manual input by technicians. This data includes:
Gradient
Probe type
Length
Serial number
Additional Features
Models available for inventory control or inventory control with leak detection.
Capable of precise leak detection, density measurement, and inventory monitoring.
Suitable for use with gasoline, diesel, DEF/AdBlue®, and other manufacturer approved products.
Bottom mounted installation for fast and simple install.
Vibration motor integrated into probe head pulses every 5 minutes to reduce the effects of stiction on level reading and leak detection, providing readings with higher accuracy.
Screw-in electrical connector provides quick installation or removal, eliminating the need to re-splice wires.
Highly accurate digital communication between the probe and the tank gauge.
Probes are available in many sizes that are suitable for all common tanks.
Easily installed into 2”, 3” or 4” riser pipes.
Operating temperature: -40° to 140 °F (-40° to 60 °C)
Storage temperature: -40° to 158 °F (-40° to 70 °C)
Non-linearity: ±0.025% of full scale
Repeatability: ±0.001"
Temperature sensors: 5 thermistors located in the shaft
Temperature resolution: ±0.02 °F (±0.01 °C)
Probe pigtail: 10' long three conductor cables with shields and polyurethane jacket
Compatible with up to three floats for product, water, phase separation detection, or density measurement.
Compatible with Franklin Fueling Systems tank gauges including: TS-550 evo™, TS-5000 evo™, TS-5, TS-550, TS-5000, Colibri®, TS-1001/2011/750/504/508.
Approvals/Certifications
UL & cUL listed, ATEX, IECEx
Applications
Digital probes feature exceptional linearity, resolution, and stability, and are used in underground and aboveground storage tanks. Two types of probes are available for the following applications:
The leak detection probes are typically used for underground storage tanks and petroleum applications when static or SCALD leak detection is required.
The inventory control probes are typically used for aboveground storage tanks, chemical or oil waste, or underground storage tanks that do not require in-tank leak detection.