ZUWA UNISTAR/K 2000-A – 230V Impeller Pump (30 L/min, 4 bar)
Compact, high-pressure impeller pump for fast transfer of compatible liquids where a reliable 230V plug-in pump is required. The UNISTAR/K 2000-A combines a durable aluminium pump body with a flexible TPU impeller and Viton® (FKM) shaft seal, making it a great choice for many industrial liquid transfer duties.
Key specs at a glance
- Max flow: 30 L/min (1.8 m³/h)
- Max pressure: 4 bar
- Connections: ¾" male threaded inlet/outlet
- Motor: 230V AC, 0.37 kW, 2800 min-1 (IP55)
- Max fluid temperature: 60°C
- Materials: Aluminium housing (EN AW-6060/AC-43400), TPU impeller, polyamide bush, Viton® (FKM) seal
Typical applications
- General liquid transfer where a compact 230V pump is needed
- Mobile service/maintenance work (supplied with cable and plug)
- Duty requiring a combination of good flow and higher pressure versus many small transfer pumps
Fuel/flammable liquid suitability (important)
This is a non-ATEX pump. It is generally used for transferring higher flash-point fuels such as diesel-type products, but it is not suitable for petrol (gasoline), solvents, or low flash-point liquids. Do not use for liquids with a flash point below 55°C, or in potentially explosive (hazardous) atmospheres.
What’s included
- Impeller pump with electric motor
- Cable and plug
Note: Always confirm chemical compatibility and site safety requirements for your exact liquid and installation environment.