SGB 115360 Digital Pressure & Vacuum Test Gauge – –1 to +2 Bar
The SGB 115360 is a handheld digital pressure and vacuum gauge for the accurate testing, commissioning and maintenance of SGB leak detection systems.
With a measuring range of –1 to +2 bar, it is suitable for checking vacuum leak detectors and compatible low-pressure overpressure leak detectors. It provides a clear digital reading, helping engineers accurately monitor pressure changes and record the pump and alarm switching points of the leak detector during a functional test.
The gauge is designed for use with SGB testing devices, including the SGB 115392 and SGB 115395. Connected to the test device’s gauge port, it allows controlled pressure or vacuum changes to be measured while checking pump operation, audible and visual alarms, and reset values.
Typical Uses
- Commissioning SGB leak detection systems
- Routine inspection and annual functional testing
- Checking vacuum and pressure alarm switch points
- Verifying pump start/stop and alarm reset pressures
- Monitoring controlled pressure or vacuum changes during testing
Key Features
- Handheld digital pressure and vacuum gauge
- Measuring range: –1 to +2 bar
- Clear digital display for accurate readings
- Suitable for both vacuum and low-pressure overpressure testing
- Recommended accessory for SGB 115392 and SGB 115395 test devices
- Suitable for SGB vacuum leak detectors and overpressure leak detectors operating up to 2 bar
Important Information
The SGB 115360 is intended for testing applications within its –1 to +2 bar measuring range. For leak detection systems requiring test pressures above +2 bar, a suitable higher-range pressure gauge must be used.
Testing and adjustment of leak detection systems must be carried out by suitably competent personnel in accordance with the relevant SGB installation and maintenance instructions.